客户要买轴承制造设备
作者：cad 提交日期：2008-11-20| 分类: | 访问量：
客户要买轴承制造设备
本帖被 tandongchi 从 技术求助, 应助 技术心得, 探讨 移动到本区(2007-10-07)
客户要买一套轴承制造设备，但是我对这个不是很在行阿，下面是他的要求，我不知道能不能麻烦那位好心人，帮我讲讲他的要求，国内谁家能够做到？
万分感谢。
Let me know if you can offer under mentioned Machine for client .
TAPER ROLLER PROJECT
·Header:
1. Capacity 10 Dia to 25 Dia
2. No of strokes per minute – 80 to 100
3. Taper roller degree – 1 to 80 including aryle
4. Material to be headed – SAE 52100
5. Double stroke – Dimple on the face of rollers. And should be able to produce required corner radius.
6. Should have feeder decoiler and straighterner of wire.
7. Proper lubrication at all the levels.
8. English Manual with all electrical drawing.
· Heat treatment plant Continuous Furnace:
Should be capable of hardening 200 Kgs./hour –shaker hearth furnace with quending and temparing for hardening roller from 7 mm to 25 mm and rings up to 60 mm.
· Crack Detector:
Should be capable to check the crack on face and OD (surface crack) for taper roller from 10 mm to 25 mm and widht12 mm to 35 mm.
· Duplex:
For grinding one face of taper rollers, should have
1. Face grinding of feeding plat on machine itself.
2. Auto feeder of roller.
3. Continuous dressing of grinding wheel for radius of rollers.
4. Feeding plate for degree from 10 to 80
5. Diameter-10 mm to 25 mm and width 12 mm to 35 mm.
6. Radius 100 mm to 350 mm
7. Should be able to achieve squareness within 0.005 mm
8. Should be able to get surface finish 0.15 Ra
9. Should be supplied with English Manual with all electrical Hydraulic cirait
· ·Centre less
Machine is required to grind the Outer Dia of taper rollers of following capacity
1. Diameters – 7 to 25
2. Length – 10 mm to 35
3. Quality – grade 2 rollers (Roundness less than 1 micron)
4. Should be able to grind rollers of 1 to 8 Dergree
5. Need 12 drums extra along with machine
6. Material may be SAE 52100 or SAE 8620 with hardness 61 to 63 HRC.
7. feed rate around ( 60 to 80 rollers per minute)
8. Grinding allowance in each pass 100 microns.
9. Machine is required with Manual in English.
· ·Super Finish:
1. Should have capacity to hone the size from 6 to 25 mm Dia and length 10 mm to 35 mm
2. Surface finish required 0.1 RA
3. Should be able to generate 5 micron crowing.
4. Should be able to hone the rollers from 10 to 80
5. We need 100 rollers/minute
6. We will require feed roller for at least 4 sizes.
你好,不知道有没有找到了,
sstwjl@hotmail.com
你用中文告诉我。发到CAOYS@126.COM但是要告诉我他用于加工什么类型的轴承。是否包含锻工，车工，磨工，装配等等。
[ 此贴被petter0710在2007-12-28 13:25重新编辑 ]
Heat treatment plant Continuous Furnace:
Should be capable of hardening 200 Kgs./hour –shaker hearth furnace with quending and temparing for hardening roller from 7 mm to 25 mm and rings up to 60 mm.
热处理设备你可以找苏州胜龙电炉制造公司，他们有一款专利的电炉，余温回火能有效的节约电力。声明我不是为该厂做广告。您可以自己去了解。http://www.sz-sl.com/
无锡市博阳精密机械制造有限公司
专业生产轴承自动化生产线
电话0510-83570871
本文摘自：http://www.jxcad.com.cn/read.php?tid=419933&fpage=2
问题没解决?请到"CAD家园"查找或求助!
